turbo low circuit cel?
 

Hey guys I just bought a 2002 2500 4x4 completely stock and I had recently purchased a quadzilla boost fooler and when I plug it nto the map sensor and start the truck I get a CEL for Turbo circuit low and the truck goes into limp mode. I have no programmer cause I got a 5yr 100,000mile warrenty on the truck when i bought it and I don't want to mess that up. But is their anyway that i can run a boost fooler without having a programmer? I check the pins on all the plugs and everything seems good.

It should work without a tuner, it sounds like the boost fooler is faulty and most likely it tested wouldn't be producing correct voltages. But in all honesty you don't really need one until you have a tuner, it really won't make any difference at all.

Sent from my DROID RAZR using Tapatalk 2

Remove the Boost Fooler


Luke

That's what I was thinking. I will probably eep it for when I get a tuner. I did get this off eBay for half the price and it did come sealed with a quadzilla sticker but that doesn't mean it is actually from them but it came with a warrenty card I might try and get it warrentied. I was just hoping to get a little extra boost and trying to see if this would help