BD or industrial
 

What's better a bd killer b or a phatshaft

I loved my phat shaft. "and my wife does to:w2:" I got 54psi out of it according to EDGE CS

Both a great turbos! I have ran both and like them. Depends on what you really want. The killer b should flow alittle more air that the phatshaft will

well i have and edge comp drag box and a smarty. im in the process of rebuilding my motor. going to put 150 or 160hp injectors. possibly a cam and sugestions on a cam? and a manifold. its going to be a daily driver but pull now and then?

I bet Scott says Colt Cams....sry just working for a free shirt scott.:c:

do i need to instal new cam barings if i install a newd cam??

Dang you know me all too well bud! I would say a colt stage 3 cam and if the engine is apart I would replace the cam bearing and buy new tappets. If you go with a cam and those size injectors I would go with a silver 62 from IIS. That turbo will flow plenty of air for your setup and spool quick with a cam.

I also like Hamilton Cams


Luke