truck not charging when on
I had some questions on why my truck wont charge i replaced pcm cause i heard they are famaous for the external voltage regulator problems and its still not charging it threw a crankshaft code and im not sure if that would mess with the charging please help!!!!!!
|
Have you put a multi-meter on the battery when running to check voltage? Or are you just looking at the guage?
|
Its reading 11.3 when running but the gauge in the cluster has no volts
|
Since you have already thrown a PCM at I would imagine we can eliminate it, I would have been more inclined to put an alternator on it, that would be my suggestion. Worst case scenario take it to one of the auto parts stores that test them and have it tested before you buy a new one.
Good Luck! |
Could also be your external voltage regulator.......:w2:
|
Voltage regulator is built into the PCM as far as I know. In any event test the alternator as starting point.
|
I have a new alt in it and had it checked and the voltage regulator is in the pcm and i just changed the crankshaft positioning sensor but ive heard about people eliminating the voltage problem by puting a ford external voltage regulator i just dont know what i need or how to do that so i tryed everything else i could think of
|
Originally Posted by talan707
(Post 959599)
I have a new alt in it and had it checked and the voltage regulator is in the pcm and i just changed the crankshaft positioning sensor but ive heard about people eliminating the voltage problem by puting a ford external voltage regulator i just dont know what i need or how to do that so i tryed everything else i could think of
|
The pcm is a reman
|
All times are GMT -5. The time now is 03:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands