air dog fuel issues
Hey guys,
so bought a used Juice w/ Attitude and Installed it today. Immediately said I had 7 psi at idle so I turned the screw on my Airdog and got it to 15 psi idle. at wot it dropped to 0 quickly so I turned it more now it sets at 20 idle and drops to 1-2psi at wot at level 3. level 4 is 0psi quickly and at level 1 i stay around 4 psi. I have a few questions. 1. I installed the sensor on the intake banjo at the VP. is that correct? 2. should there be this big of a difference in fuel? seems like the airdog was supposed to supply plenty of fuel to keep those numbers close. ( I don't have any other mods) 3. Will it hurt to have the pump running 25 psi @ idle to keep wot pressure above 7? thanks Nick |
That is a good place for the sender. There shouldn't be that big of difference in fuel pressure. 25psi is a little high, I don't like to see over 21-22 at idle.
It may be your pressure regulating valve in the VP44. https://www.dieselbombers.com/98-5-0...formation.html |
Thanks for the link i was wondering about that. ill check it out asap. im guessing that isn't a part i can get at . Anyone have a part number?
|
when we installed my airdog we had questioned where to put the sensor for the fuel pressure guage on my juice w/attitude so we called airdog and they told us that it is supposed to hook to the airdog pump. i run mine hooked into int and at idle im at 15psi and at wot it has never dropped below 10 psi.. just my 2 cents.... :rocking: i believe i have the pictures on my phone if you would like to see them... all we did was lenghten the wires on the fuel guage to reach to the airdog
|
All times are GMT -5. The time now is 03:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands