24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

possible tranny problem?

Old Aug 12, 2012 | 09:45 PM
  #1  
codyawise's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2009
Posts: 345
Likes: 12
From: Chambersburg, PA
Default possible tranny problem?

i have 3.55 gears in my truck and whenever i get around 45-55mph the tranny tries to downshift and then it'll go right back. i figured out that this really only happens whenever the trans temp is over 170. so my question is, is there anything wrong with my tranny, anything i can do to keep my trans temp lower?
any help will do thanks

---AutoMerged DoublePost---

any ideas on what it could be?
 

Last edited by codyawise; Aug 12, 2012 at 09:45 PM. Reason: Automerged Doublepost
Reply
Old Aug 13, 2012 | 12:39 PM
  #2  
globalwarmingcontributor's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 194
Likes: 12
From: Illinois
Default

well, ill be the first one to answer.. im sure other guys will chime in.. could be a TC lockup switch.. theres also an APPS noise isolator that BD diesel sells. it fixes RF interference from the APPS circuit, which could be causing your issue.. heres a link to what im talking about.. i think they run like 25 bucks or something like that.. may be a good try.. i think ive seen them on ebay. hope this helps

BD Power - Product: APPS Noise Isolator
 
Reply
Old Aug 13, 2012 | 12:41 PM
  #3  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

170 sounds fine. Trans oil goes from the trans to a heat exchanger. Engine coolant warms the trans oil (upwards of 190*), then it is sent to the cooler at the front to cool down a bit.

Almost sounds like a torque converter lock up issue. Any codes?
 
Reply
Old Aug 13, 2012 | 05:10 PM
  #4  
codyawise's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2009
Posts: 345
Likes: 12
From: Chambersburg, PA
Default

I have not checked for any codes. What do yall mean by it could be a lockup switch? What exactly does a lockup switch do? Is it better for it to be locked or unlocked?
 
Reply
Old Aug 13, 2012 | 05:44 PM
  #5  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

Have a look at this:
http://www.tstproducts.com/Torque%20...p%20Switch.pdf
 
Reply
Old Aug 14, 2012 | 10:09 AM
  #6  
codyawise's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2009
Posts: 345
Likes: 12
From: Chambersburg, PA
Default

so you guys think that noise issolator could help out my problem?
 
Reply
Old Aug 14, 2012 | 11:16 AM
  #7  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

It could. The rewire is a lot cheaper, and may fix the problem. I would start with that. You may also want to do an APPS reset, and relearn. If you search this site for those two procedures, you'll find a write up.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
Sep 14, 2015 06:34 PM
tim12valve
12 Valve 2nd Gen Dodge Cummins 94-98
9
Apr 21, 2015 05:51 PM
wilki
5.9 Liter CR Dodge Cummins 03-07
1
Feb 12, 2015 09:04 AM
Ol' RED!
12 Valve 2nd Gen Dodge Cummins 94-98
2
Dec 11, 2014 10:00 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:39 PM.