fuel pressure gauge install question.
 

So i bought the gauge with the gauge kit and am getting ready to hook it up, Do i need to use the pressure gauge isolator shown in the pics? and if so what does it do? also i have a schrader valve coming off of my vp44 can i plumb the gauge in there?
http://www.mazdas247.com/members/THE...ekpressure.jpg
http://www.mazdas247.com/members/THE...lpressure1.jpg

Yes you need the isolator, it prevents fluctuations caused by the vp. And yes it can go where the schrader is, once it's been removed.

A needle valve will prevent water hammer. The isolator will keep you from having to run fuel into the cab. The isolator will have fuel on one side and antifreeze on the cab side. I don't mine having fuel in the cab, but some people don't like it. Hook your fuel line to the shrader valve on the vp then to a needle valve then to the isolator or the gauge.

Sent from my DROID3 using Tapatalk 2

Did my kit come with a needle valve? or will i need to buy one?

Also i cant pm yet empty wallet, where are you located in CT? im in Southbury

Mu guess is that it didn't come with one. Go to Napa, they have them.

Sent from my DROID3 using Tapatalk 2

do you have a link to said needle valve so i have some sort of idea what im going to ask the guy at napa for lol

Let me look for one.

Sent from my DROID3 using Tapatalk 2

lol thanks man.

NAPA (Weatherhead) #WH6820 is the part number.

Mopar1973Man's Dodge Ram Cummins Turbo Diesel Forum - Fuel pressure gauges and needle valves

Also check out this site. Lots of good info.

Thanks man