Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   Draw straw cherry (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/93795-draw-straw-cherry.html)

tower_ofpower 03-31-2012 06:57 PM

Draw straw cherry
 
Popped my draw straw cherry today, never had a low fuel issue with the draw straw, 3/8 of a tank blew it around and grabbed a little rubber in dicks parking lot, about 300 feet thru the lot low oil pressure light came on... Old girl stalled on me. Picked fuel back up on its own after some cranking, I was almost positive my fuel shut off solenoid crapped the bed on me. :argh: glad it was something simple, I was NOT going to be happy if I got stuck in a parking lot.


Sent from my iPhone using Tapatalk

ricet07 04-01-2012 11:57 AM

How did you cut yours, just wondering?

tower_ofpower 04-01-2012 03:10 PM

Measured from top of sender to basket bottom cut it to length then notched the end like a rook chess piece.


Sent from my iPhone using Tapatalk

ricet07 04-01-2012 05:55 PM

Yea thats how I cut mine besides I didnt use the basket I used a quarter (.25 cents) for a gap reference with the tank basically empty. I havent ran mine very low since I put it in but im hoping my method works good.

tower_ofpower 04-01-2012 06:56 PM

Like i said, I've ran the thing down to 1/8 tank and never had an issue with low fuel, horsing on it around a sharp turn and apparently made it uncover the straw. But see my basket which is "supposed" to hold fuel in it is missing the trap door because it has a 3/4" hole that will let the fuel run right out of the basket; not just in.


Sent from my iPhone using Tapatalk

tiremann9669 04-01-2012 07:01 PM

I usually start thinkin about fuel at about 3/8, I don't want to mess around priming my truck :c:

tower_ofpower 04-01-2012 09:05 PM

Yeah I was lucky it picked it back up in its own since I didn't have any tools with me, would have been real cool lol.


Sent from my iPhone using Tapatalk

tower_ofpower 04-10-2012 12:01 PM

Did it to me again, this time with half a tank. Seriously thinkin it's time for a bottom sump and Teflon coated braided stainless lines... This time it stranded me since I didn't have tools.


Sent from my iPhone using Tapatalk

moparbubbabt59l 04-10-2012 12:11 PM

Im gona do a fuel sump with 1/2 lines to my piston lp.

Sent from my DROIDX

tower_ofpower 04-10-2012 12:46 PM

Polyperformance.com has baffled boxes that you put in a tank and duck bill shaped pick up with -AN fitting... Been looking at them... Far from cheap tho


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 11:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands