Confusion with rear driveshaft center bearing
 

ok this has been frustrating...

i have a 1993 dodge w250 extended cab 4x4 5speed cummins.

i'm almost positive that my centre bearing is shot.. along with all the ujoint, i have all the ujoints, but figured i better do the centre bearing while everything is apart.

My problem is, i went out and mesured the inside diameter of the bearing and its 1.5"
napa is trying to sell me one that has a 1.37 inside diameter.

looking through parts sites, i think i COULD use a center bearing from a 1994 W250 as it has the 1.56" inside diameter.
Does anyone know what the part number i'm looking for is?

i really would like to order the part today and have it in for tomorrow.

---AutoMerged DoublePost---

I've had some success on finding my part.
I thought i would share the part numbers for the Hanger Bearing that has the inside bearing diameter of 1.57"

Anchor #6038
Dodge Parts Counter # 4428802
Lordco # HB 88508 AB

Napa has the bearing but in my haste i forgot to grab the part # tomorrow when it comes in i'll post that number aswell, but i had them cross reference the dodge #

When I took mine in to a drive line shop, the guy at the counter knew the numbers from memory. Now that's what I call a parts person.