about 8 months ago i wreaked my first gen insuranced totaled it i bought it back an parked it untill iwould have time for it yesterday i decided to get it going ihad to patch the oil pan filled her up put a battery in now mind you its about 16degrees out she cranked 3 times and fired she ran like crap for about 15 seconds and then smoothed out so i decided to get her back on the road but i need a radiator the problem is i cant find one for under 500 bucks an they only put this radiator in from 89 to 90 the rest are different any help i can get thanks

 

Passenger side upper and lower radiator hoses right? Downflow radiator. For the price of a stock replacement I'd spring for the aluminum cross flow and be done with it. If you go to a junk yard and pull an IC'd thermostat housing you could get a driver side upper, passenger side lower radiator, a little more common.


Sent from my iPhone using Tapatalk

 

well around here first gen dodges arent common do you know where i could find that piece

 

Just got to thinking, an IC'd radiator probably wouldn't do you any good as the mounts are different.


Sent from my iPhone using Tapatalk

 

so about my only option would be to find a stock replacement

 

Aftermarket aluminum, but they run $500. A lil more pricey but tons better quality


Sent from my iPhone using Tapatalk

 

where can i find the aluminum and all of the stock ones i have found are around 500 to 575

 

1990 RAM 250 REGCAB

I don't know if it has a good radiator or what they would charge but you could give them a shout.

 

Summitracing, griffin radiator makes them.


Sent from my iPhone using Tapatalk

 

http://m.summitracing.com/parts/GRI-5-579GG-CAX

Little more expensive than I remember plus a oversize handling charge.


Sent from my iPhone using Tapatalk