Thermostat Housing
#1
Thermostat Housing
Need a second option on this. I have a small amount of coolant running down the side by the alternator. I have no oil or coolant mixing either way and never gets hot, just have the swinging needle that moves with engine load. I don't think its the HG because I have some coolant that looks like its seeping from the side of the housing and what looks like seepage from the very top bolt on it. I tried tightening but its tight. Is it possible for these to leak?
#2
yes it is clean it with break clean and blow dry with compressed air have some one stuff a rag and the blow gun in the filler neck on the rad and charge it with 10-20PSI while you look for leaks if you find thats its comming from the t-stat then unbolt it and reseal it with silicone i would also change the stat just for fun since you there
#3
The following users liked this post:
big bad diesel 416 (11-22-2011)
#4
Thread
Thread Starter
Forum
Replies
Last Post
Spiderman
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
10-06-2014 09:52 AM