Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   kickdown cable/ tv cable? (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/79553-kickdown-cable-tv-cable.html)

blackout 07-13-2011 09:10 PM

kickdown cable/ tv cable?
 
i recently bought a 91 w250 with a the 727 automatic transmission. and im just wondering if it has a kickdown cable or tv cable? whatever it is ,its unhooked and ive been looking around and it says the tv cable controls the pressure and is vital for the transmission to work?
can you guys help me out here thanks

RSWORDS 07-13-2011 09:16 PM

Here you go... And yes you need it.

https://www.dieselbombers.com/dodge-...djustment.html

oh and...

:hi:

blackout 07-13-2011 10:41 PM

thanks you !...well apparently the kickdown doesnt work at all so thats why it was disconnected.. have any idea why it wouldnt work?

jwirth 07-13-2011 11:34 PM

surpised it wasn't burnt up being unhooked. is the transimission operating correctly. (all but kickdown) is it shifting right and does it have engine braking in low and 2 when you manually shift it.

turbostang7 07-13-2011 11:36 PM

Re: kickdown cable/ tv cable?
 
Is the cable bad? Should move freely inside of the plastic tube it goes through could have gone bad so they just unhooked it

Sent from my DROIDX

blackout 07-14-2011 07:29 PM

the cable is good. im going to hook it back on and adjust properly and see if it works . its been unhooked for a while now and is still drives good? thanks for the input guys. i will tell you tomorrow if i got it to work or not

Begle1 07-14-2011 07:42 PM

If you have a problem with it glued in the full-throttle position, then you are a more sensitive man than I am.

blackout 07-17-2011 09:34 PM

what do you mean begle?

Begle1 07-17-2011 10:06 PM

I have 300 HP, a Goerend converter and Suncoast transmission with manual valve body and ratchet shifter, and I can't notice any difference when I move the TV shaft one way or the other.

jwirth 07-18-2011 01:19 AM

:argh:

caribooredneck 10-14-2011 11:29 PM

Hey my cable is broken, wish it was just unhooked. I cannot find another one to replace it, not even from dodge. All I can find are gas pot ones. Any ideas? Guess if I had too, I could modify it. Been looking for a couple of months so far.....

kieron_kohlmann 10-15-2011 10:29 AM

I bought one of these cables when i did the P-Pump swap. With a little modification it works great!

BPE TorqueFlite Kickdown Cable Kit

caribooredneck 10-16-2011 02:08 PM

Thx kieron
I found one through Lokar. I believe with a little mod here too it should work.... With the amount of these trucks and engines in the world, I am surprised that there is no listings for them anywhere.
Thanks again
Keith

jwirth 10-17-2011 09:03 PM

Throttle valve cable( kick down) 89-93 dodge cummins | eBay

caribooredneck 10-17-2011 11:56 PM

Hey jwirth

Thanks for the info. Main problem is he ships to the US and I am north of the 49th.......

jwirth 10-18-2011 01:20 AM


Originally Posted by caribooredneck (Post 810945)
Hey jwirth

Thanks for the info. Main problem is he ships to the US and I am north of the 49th.......

Try calling and see if he'll ship it. phone is in the ebay post

caribooredneck 10-19-2011 12:42 AM

Cable
 
Thanks for the idea. I have a cousin in washington too. I am getting a hold of him too, to see if he will forward it as well. I am gonna call him in the next day or two, as i work long hours too.


All times are GMT -5. The time now is 04:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands