KSB solenoid leaking fuel
Well its not really the solenoid leaking its the brass piece in the end which I think is a check valve but I was wondering if it can be taken out and if it has an oring seal that needs to be replaced?Any help would be appreciated.
|
Does anyone know what im talking about?
|
Can anyone help me with this problem?:argh:
|
The fuel blow-by thing? Under where the banjo bolt is on the back of the pump??
|
If you are looking at the pump from the front of the motor its on the side closest to the frame down closer to the bottom it has a selonoid just like the fuel shutoff selonoid and on the other end is a check valve it advances the timing during coldstarts.
|
sorry to hijack thread but what is this. I dont think mine is hooked up ( a check valve it advances the timing during coldstarts ) :humm:
|
Could you get a pictue of where it's leaking exactly?
crewcab59: it's on the right side (if your looking at the engine strait on) of the pump below the manual shut-off switch. It has one wire that should be connected and one fuel line. I think it's a fuel line haha. You can hear a difference in the engine if you unplug it right after start-up |
yeah my check valve is leaking fuel not the solenoid has anyone else had this problem?
|
maybe
i have fuel coming out of the black thing under bango bolt and i took fuel pin out and there is fuel in there
|
To fix the leak your gona need to take a day and replace a seal in the top of your IP. If you don't already have a 3200RPM spring in your pump now would be a good time to do so. There only like $20 at max and make a world of difference! You're gona need the rebuild kit for the pump also. It's like $20 as well. Heres how to fix that seal. Fix That Leaking Fuel Pin - Midwest Diesel Connection
|
All times are GMT -5. The time now is 11:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands