Injector size question.
I'm trying to identify what injectors are in my truck. The number on the side is 9350 and they are a light grayish color. I think they might be pod's because I can't control egt's when I tow trailer and they haze pretty bad at idle.I can break the tires loose in 2nd,3rd, and 4th gears once the turbo lights and the power screw is only 1 turn in.
|
I believe you have 40 hp DDP's because the part # is 899350lpm, so the 9350 kinda fits into that.
Dar |
bosch has a part with that number i believe. they used to sell them on ebay if im not mistaken.
|
I'll pull them out and get the number. I plan on putting bosch 190's in to help with the fuel mileage,right now it only goes 150 miles on a tank when towing 8500lbs.:td:
|
150M to 30G of diesel thats only 5MPG!!!!!!!
The ole girl needs some help i dont ever think I have heard of getting 5MPG in a cummins unless it was running on 2 cylinders.......... |
I was shocked to,I stopped a few times to make sure the pump wasnt leaking or dumping fuel into the crankcase. The 12 valves at work in the buses get 4.5-6 mpg,but i didn't think it was possible in a pickup. Ive been having pump problems too so its time for a total injection system overhaul.:rocking:
|
go to search at the top right hand side and put in 1st gen injectors lots of good info there:yeah:
|
Well I did a search and I think I may have a cracked tip. Will I need to get new copper washers if i'm only pulling them to look at?
|
no there just like a washer not like a seal they can be reused if that makes sence
|
All times are GMT -5. The time now is 01:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands