install a 1st generation in a 89 wagoneer
 

i am looking for a kit to install my 1993 12 valve cummins in my 1989 Jeep grand wagoneer.any help would be appriciated.

not sure where to start .i know it has been done in chevys and fords :argh:

Im interested to see how this conversion turns out, be sure to keep us posted.

Don't know of a 'kit'...

It's strictly a DIY.

There is no kit that I know of either but it has been done before. I have two grand wagoneers and hopin to put a 4bt in one of them some day. I have a 3 inch body lift on one of mine and it made for a crap ton more room for the transmission so if you get in a bind for space that might help you.

since I would like to do that in an 89 Grand Wagoneer ..I would be interested if you ever did this swap?

a 4bt would be alot better engine swap and I can help you out with that stuff. a 6bt is a whole lot of engine for a waggy, very heavy too. a 4bt will get 25+ mpg and have tons of power