93 cummins swap in to a 93 1ton chevy
 

ok guys im getting a 93 1 ton single cab dually for my wife :humm:and its got a cummins in it but it was a ranch truck and I havent gone to see it yet but for 200 bucks ill pic it up lol so my question is who done a cummins in a chevy an how did you get the gauges to work or what or how did you get every thing hooked up please im getting his truck next week and I need info thank in advance JD:c:

its ALOT of work. all of my stock gauges work but i added a mechanical water temp just for extra measure. i used a chevy alternator, which makes the voltage and tachometer work. i used the stock chevy oil pressure and water temp and just found adapters to fit them into the factory dodge locations. and speedometer is very tricky if you didnt use the chevy transmission. if you used a dodge transmission in it you just need to take it to a speedometer shop there is a special converter they will need to use for it

iI put a 90 cummins in my 89 Chev 1 ton...went in nice....built a 3" lift kit for the cab
also used delcoramie alenator....used adapters and used Chev sendouts...i usde Dodge trany and transfer...had new drive lines built..the Chev speed O cable worked in the Dodge transmission but is a few mph off...you can get the coverters at transmission shop as tltruckparts said...it runs like a dream...my 1ton Chev rides smoother then the Dodge 3/4 ton the diesel came out of

that is a whole different monster though. putting the engine in an older eighties body chevy truck is ALOT easier than doing it to the 90's style trucks.

but if everything is already done but wiring the gauges you should be set.

Thanks guys yall got any pics of them and more info:humm: