Turbo Specs
Does any one have the specs for my stock first gen turbo?
|
:humm: 53/60/18 or 21depending if auto or manual
|
its a manual
|
Inducer Side: Sucks
Exducer Side: Sucks A/R Ratio: Sucks Turbine Diameter: Sucks Impeller Diameter: Sucks Mass Air Flow: Sucks Weight: Acceptable Wastegate: None MTBF: Sucks |
its a 21
|
Originally Posted by Begle1
(Post 550134)
Inducer Side: Sucks
Exducer Side: Sucks A/R Ratio: Sucks Turbine Diameter: Sucks Impeller Diameter: Sucks Mass Air Flow: Sucks Weight: Acceptable Wastegate: None MTBF: Sucks |
well mine has a waste gate and it still six i dont make much boost butt i ren about 11 psi and the most i can get outa it is prolly 18 or 19 im just going with a 60mm compressor upgrade for 250 :jump:
|
if your only seeing 18 or 19 out of it you got a problem somewhere. mine did 20 stock. and did about 35 before i pulled it out. you probably need a boost elbow on there to mess with the wastegate
|
I got 29psi out of mine with just dennyt pin and 3200 rpm spring.
|
mine says it is an H1c but i am pretty sure it is a hybrid. it has a wastegate and i have seen well over 40psi boost on two different guages and still holding up.
|
All times are GMT -5. The time now is 01:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands