91 dodge auto
how stout are these automatics. also what transmission mods would be good for using this pickup to pull heavy loads. i will be putting a 4.56 gear rearend in it
|
torque converters are a known weak link in these transmissions a good aftermarket tc is a must. the 518 doesnt tend to like holding up too much IMO, ESPECIALLY the overdrive units
|
yep and a valve body or shift kit
|
anybody now what it would take to put a chevy nv4500 in this dodge. i have a dodge flywheel, clutch and all hydraulics. can i just switch the input shaft to dodge
|
The 4500 in the diesels is different from the 4500 from the chevys. Its alot more HD.
|
well if the nv4500 is from a chevy diesel all you really need is the different bellhousing i believe and possibly the rear engine adapter
|
I've been told the chavy 4500's were weaker.
|
they are up until like 96 or 97 i believe. after that there a very good trans and IIRC they dont have the 5th gear problem
|
my 4500 is a 94 model. the input shafts are different. but i didnt know if they have the same size input shaft gear as the dodge tranny
|
All times are GMT -5. The time now is 05:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands