1st gen turbo
 

ok guys i am wanting to get a good turbo for my truck nothing like super expensive butt i also dont want a cheap one i just want a good after market turbo for my truck any suggestions thanks:tu:

Super 40.

i was happy with a 60MM wheel upgrade

hx35 best 216 dollar upgrade ever :yeah:

an hx35 is a really week upgrade though. especially if you plan on running injectors and all fuel upgrades. id go with an hx40 at the minimum. or if you got the dough to drop 1300-1500 bucks on a turbo get a phat shaft or a super b or something along those lines. remember you get what you pay for

how much would the 60mm wheel cost

the wheels run anywhere from like 100-150 bucks i believe. but then you need to get it machined to clear the wheel IIRC and you will also need to have the shaft rebalanced so your probably looking at 4-500 said and done to do it the right way.

and even with that, you still cant go over about 30 pounds of boost without it being worthless. then your getting out the turbos map and just sending hot air into the engine and it wont gain you anymore power

100-150 bucks :scare2: when i bought mine from gillette diesel it was 250.00 + shipping

The GDS 60mm upgrade is $250 and comes complete with a new housing:

Upgrade Compressor Housing & Wheel combo (60mm inducer) for 1991.5-1994 Turbochargers

It is a fine upgrade for up to around 300hp or 30psi. It just depends on what your power goals/needs are.

need a 83mm turbo emaculator:jump: herd those things work pretty good.