bronze shavings in the tank
so; i dropped the tank today to start the AD150 install. after taking the basket apart i noticed a substantial ammount of crap laying in the basket so i decided to take a look at how dirty the tank was. suprisingly clean except for bronze shavings. any ideas? i'm hoping it isnt IP internals.
|
bump... i've been inside a rotary pump before but i dont really recall any brass parts. no idea where else the shavings would have come from... unless its something from the stock lift pump... i replaced it when i first got the truck so who knows.... i'd just like a heads up if the my IP might be going on its way out. i guess if there's brass layin in the pump when i crack it loose for the 366 spring then i'll know.
|
the bushing in the front that the shaft rides on is bronze.Do u have alot of play in your shaft?
|
are you refuring to the shaft that rotates the pump or the gov shaft??
|
man i dont know tower
|
The pump shaft bushing is brass/bronze and the vein pump is part brass/bronze.
|
That's about the only place it can come from if it's in the pickup basket.
|
Originally Posted by seandonato73
(Post 471151)
are you refuring to the shaft that rotates the pump or the gov shaft??
---AutoMerged DoublePost---
Originally Posted by Alwaysworking
(Post 471394)
The pump shaft bushing is brass/bronze and the vein pump is part brass/bronze.
|
Originally Posted by stillcummin
(Post 471678)
main pump shaft right behing the seal
---AutoMerged DoublePost--- the vein pump isnt bronze |
why would they make a piece with a sharp machined steel edge runnning and wiping over a bronze ring?Your talking about the eccentric ring?do you have a picture?ive been inside a few pumps
http://bricofoy.free.fr/voiture/pompe/dsc05310.jpg no bronze here.hmmm |
All times are GMT -5. The time now is 02:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands