Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   Stock boost? (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/38861-stock-boost.html)

Subliminal 12-21-2009 06:52 PM

Stock boost?
 
Hey guys,

I have a 91.5 with an auto.

I just installed my boost gauge this evening and took it for a test drive.

I'm seeing:

Almost no boost until I get into second gear.

Second gear tops out ~14-15 psi

Third gear gets up to almost 20 psi....but I have to be floored for that.

I turned my pump up about 1/2 turn (left the collar on), did 90 degrees on the star wheel and turned the pin 90 degrees.

Does that sound normal? For some reason I was expecting ~25...I don't know why that is though...just kind of what I thought.

Any feedback on stock boost levels? I'm not sure on the housing, but since it's early intercooled I want to say it's the large housing (dog).

Anyway, thanks!

damon

ArizonaRedneck 12-21-2009 06:58 PM

stock boost should be between 18 and 23 psi of boost somebody will chime in if i am incorrect:humm:

RSWORDS 12-21-2009 08:08 PM

Thats correct

Subliminal 12-21-2009 08:38 PM

Sooo....everything on my 'semi-baseline' looks like expected for a stock truck with 155k on the clock and a 3 inch exhaust?

RSWORDS 12-21-2009 08:42 PM

The no boost in 1st is kinda odd... Make sure you dont have any kinks at all in teh boost line, even a spot that was kinked and then bent back is a problem.

Subliminal 12-21-2009 08:44 PM

Roger that...will do. That plastic line is terrible to work with...especially when it's below freezing out. ;)

big bad diesel 416 12-21-2009 09:02 PM


Originally Posted by Subliminal (Post 456240)
Hey guys,

I have a 91.5 with an auto.

I just installed my boost gauge this evening and took it for a test drive.

I'm seeing:

Almost no boost until I get into second gear.

Second gear tops out ~14-15 psi

Third gear gets up to almost 20 psi....but I have to be floored for that.

I turned my pump up about 1/2 turn (left the collar on), did 90 degrees on the star wheel and turned the pin 90 degrees.

Does that sound normal? For some reason I was expecting ~25...I don't know why that is though...just kind of what I thought.

Any feedback on stock boost levels? I'm not sure on the housing, but since it's early intercooled I want to say it's the large housing (dog).

Anyway, thanks!

damon

dont you do an 180 rotation

seandonato73 12-21-2009 09:30 PM

depends on where it was from the factory, i onlyy had to turn mine a little to get it to the deepest setting

peobryant 12-22-2009 02:39 AM


Originally Posted by ArizonaRedneck (Post 456253)
stock boost should be between 18 and 23 psi of boost somebody will chime in if i am incorrect:humm:

For a factory intercooled truck, that is higher than normal. Even a Non I/C truck stock shouldn't see that much boost.

With the 21cm housing, and the mods you have done, your boost numbers seem fine.

Subliminal 12-22-2009 07:18 AM

Alright, thanks!

Actually, after driving to work this AM I will see 5 or so psi in 1st. Just not very much...of course, it isn't in 1st very long, either.

12vcummins96 12-22-2009 07:22 AM

you got it your fine keep :rocking:

muskrat 12-22-2009 09:25 AM


Originally Posted by peobryant (Post 456514)
For a factory intercooled truck, that is higher than normal. Even a Non I/C truck stock shouldn't see that much boost.

With the 21cm housing, and the mods you have done, your boost numbers seem fine.

Perhaps. 18psi is not really the average number, but factory recomended maximum psi for the H1C. SO, yeah, you're right in there.:rocking:

Budgreen 12-22-2009 09:51 AM

you use first????????

my first gear won't even make it to 10mph.. I always start in second :rocking:

Subliminal 12-22-2009 09:56 AM

Automatic...not really any choice in the matter. ;)


All times are GMT -5. The time now is 03:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands