wow can't believe anyone would even buy the bully dog...doesn't look near as deep
|
The Bullydog went in a friends stock 2wd. Boost went from 16 to 20 with no other mods. 3200 spring will go in soon. DennyT's went in my crewcab. Wont test until I finish my inframe. Waiting on one set of rings from Cummins.
|
Well i have the bully dog and i was satisfied at first, then i did other mods, now its hittin the can and i'm gettin the m&h m3 pin.!!:tu:
|
wanna sell the bully dog cheap?
|
Is the m3 pin as deep as the dennyT's stage 2
|
yea up high but not as much down low.
sorry i already put the BD in my dads 93 |
Originally Posted by Heavy
(Post 443448)
Is the m3 pin as deep as the dennyT's stage 2
|
The nice thing about the BD "profile" (and I'm not talking about anybody's piece, generally speaking - you can whittle up a piece of metal with a lathe and grinder any way you like) is it holds full fuel back until towards higher throttle and higher boost levels - when you really need and want it.
But if you want drive around blowing smoke all the time and wasting fuel, by all means get the more agressive profiled pins! :rocking:
Originally Posted by seandonato73
(Post 443046)
wow can't believe anyone would even buy the bully dog...doesn't look near as deep
|
Originally Posted by NadirPoint
(Post 443642)
The nice thing about the BD "profile" (and I'm not talking about anybody's piece, generally speaking - you can whittle up a piece of metal with a lathe and grinder any way you like) is it holds full fuel back until towards higher throttle and higher boost levels - when you really need and want it.
But if you want drive around blowing smoke all the time and wasting fuel, by all means get the more agressive profiled pins! :rocking: Also unlikely to cause the commonly encountered fuel pin leak when the fuel pin extends out beyond it's useful travel into a deeply cut cone. |
what does it do when it leaks RSWORDS
|
Just leaks into the AFC housing a little. More of a seap tehn a leak
|
so it doesn't do any damage to anything inside the pump.
|
All times are GMT -5. The time now is 03:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands