1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

getrag

Old Nov 17, 2009 | 12:06 AM
  #1  
big bad diesel 416's Avatar
Thread Starter
|
Site Sponsor
Joined: Apr 2009
Posts: 3,719
Likes: 636
From: Lexington SC
Default getrag

hey guys if your tranny pops out of 5th under cost and it dont feel like its going into gear fully is that a shim thing/preload? i just had it done by a shop they wont warranty it after 5 miles ya 5 miles so i am gonna do it myself and iam gonna get my 300 bucks back too i got it all held up in the Bureau Automotive Repair and Better Business Bureau there a bunch of over at that shop****

---AutoMerged DoublePost---

come on someone has to know
 

Last edited by big bad diesel 416; Nov 17, 2009 at 12:06 AM. Reason: Automerged Doublepost
Reply
Old Nov 17, 2009 | 09:32 PM
  #2  
seandonato73's Avatar
Diesel Wrench
Joined: Oct 2009
Posts: 603
Likes: 9
From: lebanon, Pa
Default

dude i wish you luck, but i don't have a clue as to why a "redone" trans would pop out of gear. if i can catch my tranny guy at his shop some time this week i'll ask for you
 
Reply
Old Nov 17, 2009 | 11:14 PM
  #3  
big bad diesel 416's Avatar
Thread Starter
|
Site Sponsor
Joined: Apr 2009
Posts: 3,719
Likes: 636
From: Lexington SC
Default

well thanks anyway i fiugured it out the duchebag at the shop didnt put any shims in = no preload = pops out of gear i have 1/4-1/2 inch of movement in the shaft this guy was a hack i have found loose bolts no shims f-ed up seals the works
 
Reply
Old Nov 18, 2009 | 08:56 PM
  #4  
DieselPerformanceGuy's Avatar
Diesel Enthusiast
Joined: Mar 2009
Posts: 301
Likes: 2
From: eastern wyoming
Default

doesn't that just **** u off when people don't care or take their time like that.
 
Reply
Old Nov 18, 2009 | 09:16 PM
  #5  
seandonato73's Avatar
Diesel Wrench
Joined: Oct 2009
Posts: 603
Likes: 9
From: lebanon, Pa
Default

thats bull $&it you better get your money back for that i'd be raising all heck
 
Reply
Old Nov 19, 2009 | 12:57 AM
  #6  
big bad diesel 416's Avatar
Thread Starter
|
Site Sponsor
Joined: Apr 2009
Posts: 3,719
Likes: 636
From: Lexington SC
Default

well as a good businessman you want to treat your customers as good or better than you would expect to be treated by someone else

EX.

he messed up i told him nicely you messed up please fix it i will pull it out and pay for parts you do the labor for free..... not so bad i would have taken this option

he says ok bring the truck up here and let me drive it so i had it trailered up there and we dropped it off for a few hours i come back and say well he tells me i didn't even drive it be case unless you want to pay me another 150 up front i dont want anything to do with it it aint my fault....... big mistake

what he didn't know that i know all about the BAR the BBB and have been mechinicin on big-rigs and heavy equipment for the last 7 years and iam laid off so i have alot of free time to pursue this matter........

now i offer him one more time to fix it (as first stated) or refund my money $150 all this is through writing with the BBB and the BAR

he still says no

now due to me getting BAR involved they snooped around and found that he did not use proper paperwork with me guess what $1000 fine for that

i open my trany up and find all this Bull and damages that were caused by his lack of care during assembly and it cost me as of today 297.65 in screwed up parts........if he would of taking the first option he could have avoided 1000.00 from BAR 150.00 in refund and i would have forked out the 297.65 for the parts not knowing what the reasing was but no

so as of now he owes me 447.65 and BAR 1000.00

he refuses to pay me the 447.65

well guess what BAR sided with me and is providing me with solid evidence that he was at fault and a lawyer to take this to court

so they advised me to sue for a realistic repair meaning if i were someone that didn't know anything and i took the whole truck to another shop to have ALL the work done local high was

Remove and install transmission 655.00
rebuild 1220.00
parts 585.94
me being troubled and without my only vehicle 200.00

so just for being a douchebag and not fixing your its gonna cost you $3108.59 to me and another $1000.00 to bar totaling $4108.59 oh and a bad rap by the word of mouth

let this be a lesson to anyone who think of screwing the most normal playing innocent guy that walks in to your shop! he just might be like me .....your worst nightmare

and guys dont get me wrong iam not like all the other sue happy americans that when you tell there kid to shutup the next thing you know they own your house
 

Last edited by Benjamin; Mar 24, 2010 at 01:28 PM.
Reply
Old Nov 19, 2009 | 03:46 AM
  #7  
captain_stabbin's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 919
Likes: 27
From: houston, tx
Default

 
Reply
Old Nov 20, 2009 | 01:37 AM
  #8  
big bad diesel 416's Avatar
Thread Starter
|
Site Sponsor
Joined: Apr 2009
Posts: 3,719
Likes: 636
From: Lexington SC
Default

Originally Posted by captain_stabbin
 
Reply
Old Nov 20, 2009 | 07:08 AM
  #9  
Budgreen's Avatar
Diesel Bomber
Joined: Dec 2007
Posts: 1,352
Likes: 50
From: Bedford OH
Default

1.) This is why I do all my own work

2.) This is why I will help out friends but not take on paying side work.

go get em!
 
Reply
Old Nov 20, 2009 | 11:40 PM
  #10  
big bad diesel 416's Avatar
Thread Starter
|
Site Sponsor
Joined: Apr 2009
Posts: 3,719
Likes: 636
From: Lexington SC
Default

thanks
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:18 AM.