Air Dog Install
How hard to do? Any input to an easy way of install? About to order one.
|
idk bout on a 93 model, but on a 2nd gen there not super hard, just make sure u have close to an empty tank of fuel when u go to drop the tank. good luck and be safe :U:
|
Worse part is dropping the Tank.
|
Or you can just take the bed off like I did
|
Very Easy... Here are some write ups.
https://www.dieselbombers.com/5-9l-c...ou-decide.html https://www.dieselbombers.com/show-t...airdog-ii.html |
airdog has to much pressure for a VE pump... hope you have already taken care of this... not sure but i read somewhere you can buy what i would call like a limiter to reduce the line pressure.... check into it..
|
If you run an AD setup from a second grn the pressure is just fine 15-20 psi and if it's still to much you can get different springs for it to drop it more.
|
Yep A 2nd gen 24v setup is perfect for our trucks. Even the fittings are correct.
The p-pump set-up has to much pressure. |
The guy told me he had one for my 1st gen truck, but I have read on air dog's site that you can adjust the pressure.
Thanks guy's for all the help. |
Originally Posted by Bad93Cummins
(Post 391215)
The guy told me he had one for my 1st gen truck, but I have read on air dog's site that you can adjust the pressure.
Thanks guy's for all the help. |
Yea i've read that you can adjust them. After I order my stacks thursday, 2 weeks from them ill order my air dog.
|
I ordered my Air Dog 100 friday, hopefully be here soon and get it installed! Very excited! Purchused the Air Dog from Jacob aka Jkidd, great guy to talk to and I got the air dog 100 for $459, got a $40 rebate!! Can't wait for that brown truck to show up! Now if my injectors could get shipped it would be perfect, lol
|
It's an easy install as long as your tank is empty. Very straight forward. :pca1::U:
|
YEa I figured, plus im just going to use my buddy's shop, so shouldn't be to bad.
|
All times are GMT -5. The time now is 07:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands