Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   Replacement Parts Catalogs? (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/29257-replacement-parts-catalogs.html)

jd147 07-13-2009 04:05 PM

Replacement Parts Catalogs?
 
Do you guys know of any good catalogs/online sources for replacement parts? When I restored my 72 chevy pickup there were tons of catalogs (JC Whitney, Harmon's, Year One, etc) offering oem and reman type parts for everything all the way down to replacement body clips. Is there a similar source for these 1st gens? An idiot pulled out in front of me turning left at a light I was going straight through yesterday and I'm pretty sure his insurance company will try to total my truck out. If thats the case I'll buy it back and have to replace the following parts: radiator, trans cooler, fan shroud, radiator support, RF fender, fender liner, grille, bumper, and most likely a ton of pther stuff I havent found yet. Any advice would be much appreciated!

Azrattler 07-13-2009 05:55 PM

i dont know where your located but CERTI FIT has always been good and has the parts in stock usually..... good luck

LOGANSTANFORTH 07-14-2009 01:45 AM


Originally Posted by jd147 (Post 364361)
Do you guys know of any good catalogs/online sources for replacement parts? When I restored my 72 chevy pickup there were tons of catalogs (JC Whitney, Harmon's, Year One, etc) offering oem and reman type parts for everything all the way down to replacement body clips. Is there a similar source for these 1st gens? An idiot pulled out in front of me turning left at a light I was going straight through yesterday and I'm pretty sure his insurance company will try to total my truck out. If thats the case I'll buy it back and have to replace the following parts: radiator, trans cooler, fan shroud, radiator support, RF fender, fender liner, grille, bumper, and most likely a ton of pther stuff I havent found yet. Any advice would be much appreciated!

if your truck isnt a intercooled truck now would be the time to make it one since everything forward of the engine is bad, and you may as well upgrade to better stuff since your already going to be spending money.....online parts are hard to find but Browns Truck Parts has alot of stuff new....... Truck Accessories, Truck Parts, Dodge, Ford, Chevy, Jeep at Browns of Two Rivers

jd147 07-15-2009 11:56 AM

I saw both intercooled and non intercooled model grilles on JC Whitney's website. There are a few salvage yards in my town... maybe I'll get lucky and find some of this stuff in reasonable condition. I think the radiator support, fender, and fender liner are the only parts I'd attempt to find there though.... I'm not a big fan of recycling mechanical components from a salvage yard. I'd rather have the peace of mind knowing they're clean inside and out with no defects rather than save $100 and put junk in it, if you know what I mean...

thanks for the help guys!

RSWORDS 07-15-2009 08:40 PM

I agree with logan go with the 91+ grill and put an intercooler in, you need the grill, Radiator, radiator core support, head light buckets, ect.

jd147 07-16-2009 02:58 PM

Would you guys suggest buy a stock intake neck or find an aftermarket one for a 91.5-93 model truck to complete the intercooler add-on?

RSWORDS 07-16-2009 04:25 PM

the I/C'ed stocker is good for what most everyone will do.


All times are GMT -5. The time now is 10:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands