Originally Posted by Budgreen
(Post 358497)
so.. what *is* the VE pump rated at pressure wise? 245-260bar is between 3550 and 3770psi which is not a very big diference.
Its a HUGE difference when you figure in that the advance needed to make the injectors perform to there potential will play HELL on your Head gasket. what is the difference in injector body and spray pattern? Body has different thread on the top, spray angle is a little bit wider is there a different set of lines available for the VE that would fit the 2nd gen bodies? no lot of unanswered questions left in this thread guys. :pca1: |
Originally Posted by RSWORDS
(Post 358500)
All the answer have been answered else where in this thread. I put the specific answers to your questions above in red.
I guess I read them more as questions than answers.. |
The long and short of it is you will get better performance and spend less money getting injectors made for a 1st gen.
|
I already figured that. I'm just that darn guy who likes to know every little detail regardless of it's importance
|
Nothing wrong with that.
|
by second gen your talking 12V right ? because 2nd gens have 12V and 24 V engines and the injectors are completely different
|
Yes DM. Good point!
|
Originally Posted by DieselMinded
(Post 358631)
by second gen your talking 12V right ? because 2nd gens have 12V and 24 V engines and the injectors are completely different
---AutoMerged DoublePost---
Originally Posted by Budgreen
(Post 358604)
I already figured that. I'm just that darn guy who likes to know every little detail regardless of it's importance
|
Cummins Injectors
Has any one researched if a 2004.5 to 2007 cummins injector will fit into a 2003-2004.
They appear to be the same. :c: |
I think the 03-04 have one injection event and the 04.5-07 have three and internally they are different. I would post this in the 3rd gen section because i'm not for certain.
|
All times are GMT -5. The time now is 12:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands