What Injectors Do You Recommend.
I'm gonna do injectors in my 93 W-250, im looking to spend around $500-600 bucks. i want to gain around 80-100hp and not lose all my fuel mileage. My truck is straight piped, turned up, and is going to recieve a stage 4 compressor upgrade from high tech turbo. What injectors do you guys recommend? Thanks
|
hmm i have no advise for you...:stupidme:
but heres a free bump i know theres plenty of first gen guys here who will chime in |
For 505 (plus core) you can get a set of new-era 435's... VERY nice injectors... I like my $300 PODs though.
|
x2 on PoDs.
I heard the stage 4 upgrade was discontinued, you might check on that. Chris |
stage 4 lives on
|
stage 4 is still available my buddie just got one, htt was on back order with the wheels thats all,
as far as injectors for only wanting to spend 5-600 go with new era 435's! |
hey smoke' em'...just wondering what your estimated hp/trq is...im lookin to buy a truck just like yours and do pretty much the same mods.
|
I have a set of Bully Dog 80hp injectors I'll sell- even pressure and good atomization. I can even throw in a clean and reset if it'd make ya feel better. They do smoke, but with the MPGs that are accompanying the smoke, I think it may be pump time (16-17mpg hwy @ 65mph).
I'm not sure if this violates forum guidelines, so if it does, just delete this post. PM me for pricing and shipping info, though I'll tell you it's nowhere near $5-600. DP |
The 435's are nice. I ran them with a Stage 4 and it was too hot. You may need to detune your pump and turn you fuel pin around.
|
I would say some pods or check out PDR they have some cheap injectors that are good
|
Any injectors that will work off any other bigger diesels? I have access to some at the junkyard. Figured its a longshot, but I have to ask.
|
Some of the industrial engines used a 7mm 4 hole Lucas injector commonly reffered to as POD's. Here's some info from the DTR Sticky
Delphi/Lucas POD Injectors Cummins Part #3802335 Recon#3802335RX Delphi Part# 6760524 Specs For the POD Injectors: Supplier # LJC6760524 Cummins Nozzle # 3919316 Supplier Nozzle # 6801127 Nozzle Opening Pressure (Bar) 260 6 Cylinder CPL # 940 Tip Diameter = 7 PDC Kit 3802335 These injectors were used for Engine CPL 940 which is classified as turbocharged yard trucks. |
Thanks!
|
No problem.
|
All times are GMT -5. The time now is 06:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands