Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   Can I use my 92 Cummins tranny when I swap to Chevy? (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/123010-can-i-use-my-92-cummins-tranny-when-i-swap-chevy.html)

jskelt 09-01-2014 10:29 PM

Can I use my 92 Cummins tranny when I swap to Chevy?
 
I'm doing a Cummins swap to an 85 Chevy 3x3. I believe my 92 Cummins has the 46RH automatic tranny in it. My question is: has anyone done this swap and used the 46RH tranny or does anyone know if it can be done? I'll change over to an NV4500 or NV5600 eventually, but just want to get the swap done ASAP. Thanks for your input!

cumminsblazer 09-01-2014 10:47 PM

Yes you can run the 46rh is it 4x4 ? Doesnt matter for the swap just wondering if its 4x4 and are you gonna do a build thread is I want the link to watch I can give many pointers in the build im very happy with my swap :c:

jskelt 09-01-2014 11:02 PM


Originally Posted by cumminsblazer (Post 1072032)
Yes you can run the 46rh is it 4x4 ? Doesnt matter for the swap just wondering if its 4x4 and are you gonna do a build thread is I want the link to watch I can give many pointers in the build im very happy with my swap :c:

Thanks! The 46RH is 2wd. I haven't decided if I'll post a build thread yet.

cumminsblazer 09-02-2014 12:18 AM

Is the 3+3 gonna be 2x4

dezeldoc 09-02-2014 03:12 PM

It is not a problem but you will need to either put a pressure switch or toggle switch in to activate the o/d. you will not need any of the computer stuff either as the motor and trans are pretty much stand alone, but you will need to wire a mopar electronic voltage regulator into it to make it charge, pretty easy though. if you are planning to run cruise control then you will need the tps and crank trigger also.

cumminsblazer 09-04-2014 06:00 PM

Plus on the tranny note if you were to run a chevy tranny it would have to be a th 400 so you wont have over drive th350 not strong enough 700r4 not strong enough I dont care how bult they are.

Dickey 04-14-2015 10:12 PM

Lots of chevy cummins conversion????
 

Originally Posted by cumminsblazer (Post 1072032)
Yes you can run the 46rh is it 4x4 ? Doesnt matter for the swap just wondering if its 4x4 and are you gonna do a build thread is I want the link to watch I can give many pointers in the build im very happy with my swap :c:

Ok not sure where this should be posted so please be patient,I have a 1991 dodge 250 cummins with 518a 4x4 that I'm using as a donor for my 2003 chevy 3500 duramax......I bought it with no motor or tranny,I would like to use everything I can off of donar but I can't figure out for sure which transfer will work with my tranny as I've read a million conflicting inputs,I'm looking at mounts from auto world unless someone can lead me to a cheaper solution.im going to make this happen come hell or high water ,I just want to be on the right track before I pull front clip.any and all help would be GREATLY appreciated.!!!!!:tu:

novapat 04-14-2015 11:57 PM


Originally Posted by cumminsblazer (Post 1072327)
Plus on the tranny note if you were to run a chevy tranny it would have to be a th 400 so you wont have over drive th350 not strong enough 700r4 not strong enough I dont care how bult they are.


I agree with the 700r4 but I will take that bet on the th350!!!:c: I have done many with great success! :tttt::c:

btw hows your truck going? did you ever make it to the track?


All times are GMT -5. The time now is 06:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands