The downpipe has to be moved back 1-2" to fit the HX35 because it is a bit longer.
|
sure it will. those turbos are essentially the same turbo just different turbine housings. the old h1c's had 50mm compressors and the later had the same 54mm compressor as the wh1c's and hx35's
this should be close dont quote me old h1c 50/58/18 newer h1c 54/58/21 wh1c and hx35 are identical shaft wise @ 54/58/12 the difference is the last number which is the volume of the turbine |
Found these specs on a dead google link (cached):
HX35, HY35, and HE351 - Turbo Ranger Forums HX35 8-blade: A/R- 0.89 Compressor inducer- 56mm Compressor exducer- 83mm Compressor trim- 46 Turbine inducer- 69.5mm Turbine exducer- 60mm Turbine trim- 75 HX35 7-blade: A/R- 0.89 Compressor inducer- 56mm Compressor exducer- 76mm Compressor trim- 54 Turbine inducer- 69.5mm Turbine exducer- 60mm Turbine trim- 75 HY35: A/R- 0.65 Compressor inducer- 56mm Compressor exducer- 76mm Compressor trim- 54 Turbine inducer- 65mm Turbine exducer- 58mm Turbine trim- 80 HE351: A/R- 0.65 Compressor inducer- 60mm Compressor exducer- 84.582mm Compressor trim- 54 Turbine inducer- 65mm Turbine exducer- 58mm Turbine trim- 80 |
All times are GMT -5. The time now is 09:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands