Turbo help
 

Alright guys, my 1991.5 W250 project is on the brink of being done all I have left is a turbo swap. I have 60hp injectors that will be arriving in just a few days, although I don't pull any trailers yet I've heard it's a good idea to get some extra air flow. My plan is throw an HX35 in so my question is, will an HX35 bolt on directly? What modifications need to be done? Or since I don't tow anything yet, is this something I can put on the back burner for the time being?

Any information is much appreciated!

Just bolt it on....... dap should have every small thing you might need.

Are you planning on going bigger than 60hp injectors later on?

My truck only has 40 HP injectors and it needs more air than the HE351CW can push.

No, once the 60hp injectors are in it will stay at that. I'm not out racing around, I just want a little more power out of the go pedal if I feel like playing around. Not to mention, the stock sticks are just now on their way out the door with the hard starts and smoke so I figured why not get some big ones :jump: