turbo
Im building up my cummins to stuff in my f350, trying to decide what turbo I wanna go with aurora 4000 or BDsuperbee. But how is the pdr hx40?
|
what HP goal?
63/65 or 63/68 may be a good match. Stick with an s300 based turbo. a 62mm will support 400HP in a 1st gen |
My goal is 500 im doing sticks denny t fuel pin stage 2, 3200 spring, colt stage 4 cam, valve springs, advanced timing and whatever turbo. And eventually p7100, port andpolish, water/method injection
|
you will want a 64mm
If you want not so much lag I can get you a 64/65/12 as long as you have a manual. 63mm may not cut it unless you have head work too. the 12v heads are restrictive. |
Well im doing port and polish and. Cam
|
All times are GMT -5. The time now is 12:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands