Hard start, miss, air in the lines. Where to check?
 

Hey guys, I've had this problem well over a year now, but I'm just getting around to addressing it. I've always had to give a little pedal when starting, and its always had a little miss chug like thing to it until she starts to warm up. I was told it's air in the lines of 5 or 6. I'm not sure which. Where should I look to solve this problem? :c:

it sounds like you have air in the lines
it could be your overflow valve an injector going to return or an old rubber line on the return side thats where i would start

Since I'm still slightly new to this whole injection system, and never have dealt with one before (I'm 17 lol) how would I go about checking all that? Sorry bout me bein a newbie and all, but if you never ask questions, you never learn anything :c:

Check all lines by motor. Pin hole will cause it to do it. Start it up and look around. That soved my problem