in my 1994 Dodge Ram 2500 im having problems with the gas pedal its extremely touchy and it will go to the floor and wont come back. Also the throttle cable is a little loose for some reason, any suggestions on what to do or how to fix it?

 

The throttle cable should have a spring on the end to keep preload on them. I've seen mechanics take them off and throw them away when installing a new cable because you really don't need it... until the cable gets old. Sounds like the spring in your TPS perch might be toast too though.

 

i have the same isue but the pedal only gets stuck when the motor is off, when the truck is running its springs back fine but the pedal is touchy *** hell any little tap sends her off... idk what the isue is ive tryed adjusting the cable put a new one on..... i just deal with it.

 

It's just a missing spring on the throttle linkage my friend. You know how the plate your cable attaches to is shaped like a diamond? Well on the other end of the diamond from the ball joint where your throttle cable attaches to is a couple of holes, one of which is where a spring is supposed to be.