hp range
 

#10 plate
140 hp injectors
delivery valves
4k gov springs
60lb valve spring
phatshaft 71 non wastegate turbo
tuned injection pump
airdog system
4in exhaust to dual 5in stacks
can i reach 450hp with this set up

depends on ur trans

As long as your trans can hold it, it should definately get you to 450hp. I would think about head studs and orings before too long also.

What size Super PhatShaft are you thinking about? I would go 64 for that much fuel.

i dont think you will like that turbo. kinda on the big side

It has a 6speed manual.what turbo should I run then

prolly a 64, when i spend the cash on a new turbo im lookin at a 62 with a goal of 500hp

Yeah you would need to look at a silver 62 to silver 64. That silver 71 will be a laggy hot smokey pig. And you may finally get that charger to light around 3000rpm.

Sorry I thought by 71 he was referring to turbine size, didnt know II made a 71mm compressor turbo. And ditto on a 71mm comp being laggy, I think it would be a sled pulling only turbo on a 12v.