is there supose to be a pin hole in the boost elbo? just got mine in the mail today and it looks like there is a pin size drill hole out of it?

---AutoMerged DoublePost---

i block and blow.. and it deff letting air out..?

i had this argument with a few guys a month or so back. there are 2 kinds of boost elbows. one that has an allen screw in it and a pin hole, and one that is just an elbow with a small orifice in the center of it that limits the air flow to the wastegate.

elbo seems to work fine... just ran threw the entire front end of the truck and installed some bilstein 5100's, and am dien to do something with the steering.. truck drives down the road good no deathwobble or anything but just want to replace it, im debating on weather i should do 98 hd steering, 3rd gen steering but then i have to reeem out my knuckles, or if i should custom build some hemi joint steering..

---AutoMerged DoublePost---

ive also consiterd a ram asist. think it would be a little much... but would be kickass to have!

Don't do a "heim joint" steering set up on a street driven truck. That stuff is OK for off road race trucks that get checked every race and joints replaced before they fail. I believe heims in your steering would be more of a liability than it is worth. Just my 2 cents worth of opinion. (well 1 cent after taxes!)

yeah i think im going with the newer style hd t design not so much $ looks alot better than the set in my truck now!!

has anyone tryed the ram asist on there onroad/dd truck? i had built one for my jeep xj but it was strickly w00d$ farthest i did on road was out the driveway into the powerlines!

milleras diesel told me the 100 plate brings to high of egts and with make you over heat get a number 8 plate and shove it a little past half thats were i have mine it tows like a champ

#10 full forward, go and get that V.B and converter. Did mine tows anything does not get hot

yank the plate :pca1:

your foot will act as smoke control ;)

i did a #10 plate full forward seems to be working good not getting to hot dosent waste to much fuel im happy with it between the plate intake and exhaust it woke the truck up alot from stock