NV4500
 

IM TRIEN TO REBUILD MY TRANNY WHICH IS AND 96 DODGE NV4500 BUT I TOOK MOST OF IT APART AN CANT GET THE GEARS OUT NEED HELP...AN CAN NOT FIND ANYTHING ON HOW TOO IS THERE AN VIDEO OR A SITE TO FIND OUT HOW...ALL THE BOLTS R OUT THE TRANNY AN DONT KNOW WHAT IS LEFT TO DO...:humm:

you have to take the input shaft out first then take the rear main shaft brearing out then you can remove the main shaft

Just did it , and he's right.

u talking about the thing that looks like a disk on the rear...cust i tried gettiong it off. but look to have sum kind of screw in it that i cant get out

IM TRING TO GET THE FORK THING OFF THE BACK BUTTOM OF TRANS AN IT WANT CUM OFF,,,IM I DOING SOMETHING WRONG:humm:

This might help out, i was trying to find a wright up, might be worth looking over to make sure you removed it all! good luck
NV4500 Transmission Exploded View

if you mean the 5th gear shift fork there is a roll pin that holds it on

ok thanks ill check it out i seen two hols on it but did not no how to take the shit off