Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   engine stalls sometimes... (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/81226-engine-stalls-sometimes.html)

alexbland 08-13-2011 06:55 PM

engine stalls sometimes...
 
Alright so best time i can discribe when it dies is when im messing around like, doing a burnout and as soon as i let off it dies, or i put my tires up to a curb and gave it some gas and as soon as i let off it died again. any ideas?

cummin_un_glued 08-13-2011 10:49 PM

automatic trans? sounds like your idle is too low it does need adjusted over time

Only1* 08-13-2011 10:50 PM

Check your idle rpm...If it's an auto trans,it's gotta be at least 800 or quick acceleration and getting out of it will kill it dead. Idle screw is at the lower rear of the p7100 pump,believe it's a 10mm screw with a jam nut.

geddy's uncle 08-14-2011 12:02 AM

The 800 rpm is with ac on "max" and tranny in drive. 850 is even better, but, eventually your brakes wear out faster.

daveO 08-14-2011 11:27 AM

I agree with the idle recommendations. Here is a link on how to adjust it:

Ram Diesel Problems

alexbland 08-14-2011 03:08 PM

2 Attachment(s)
the one with higher rpm is in park with a/c on, lower one is in drive with a/c on

cummin_un_glued 08-14-2011 05:17 PM

looks a little slow

ooley 08-16-2011 12:04 AM

had the same problem it is easy to turn up the idle

turbo2332 08-16-2011 08:12 PM

just had to turn mine up after new injectors. 800 to 850 is perfect. 10mm on back of the pump.


All times are GMT -5. The time now is 06:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands