cummins motor oil
is it ok to run mobil delvac 1300 15w-40 motor oil in a 1994 dodge 12v cummins?
|
It will love Delvac 1300. Don't forget some 2stroke oil to treat the fuel, about 1oz per gal, and get a real Fleatgaurd oil filter, don't cheese out on a Fram or something.
|
ok i've never heard of two stroke oil to treat fuel?
|
Due to smog regs they take out all the good stuff from diesel these days. You need somthing to lube your pump.
I use the Walmart Super Tech 2 cycle oil for boat motors. Buy it in the gallon jug and use two of the 16oz jugs in each fill-up. |
is it safe to do it will it mess anything up or make it smoke more? but the more smoke the better
|
Just gives the fuel a little bit of lube quality. Helps out your pump and the rest of the motor. You won't notice any more smoke from it.
I put a little too much (like 4-5oz per gal) in my 06 Superduty one time and I think it lost a little power, but that is a whole different animal. I don't think you could put too much 2stroke oil in a gen 2 cummins. Just cheap insurance with today's Ultra low sulfur fuel in an old truck. |
Originally Posted by trentonwest29
(Post 783400)
is it ok to run mobil delvac 1300 15w-40 motor oil in a 1994 dodge 12v cummins?
Chevron delo 400 Shell rotella all in 15w40 are good oils. If you want extended drain intervals, (while still doing a filter at 3k) delvac-1 or rotella t-6 full synthetic 5w40 are permissible, as well. |
ok thank you
|
I use Valvoline Premium Blue and 2 quarts Lucas oil. I've seen first hand the things that Lucas oil can do for an engine and I was impressed.
I use the Super Tech 2-cycle oil also, roughly 1oz per gallon. It actually quieted my pump down some and it idles smoother. It deffenetly won't hurt anything and like dezzrats said it's cheap insurance. |
ok im gonna use the 2 stroroke oil thank
|
All times are GMT -5. The time now is 02:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands