Couple of questions about my 95
 

I have a couple of questions about my 95, i'm not familur with the 2nd gen 12v's, here goes...

1. What's up with these blower motors, everything works great(heat & a/c)mine seems weak, it blows on all speeds, but it just doesn't put out like my 2nd gen 24V, or my 1st gen, just wondered.
2. Is there a way to check my FP without tapping the fuel line?
3. Do I have to hardwire a brake controler up, or is there a plug in like my 2nd gen 24V, I haven't even looked yet, guess i'm lazy...
4.I'm on my 3rd tank of fuel and I changed the oil, and noticed my oil pan looks a little crusty, prolly have to replace it in the future, can I just lift the motor, or does it need to come out?? Is this a common problem, I've never had a crusty oil pan on ANY CTD! NOT looking foward to that:nope:

I always appreciate all your guys n gals info, thank you as always:c:!! DB rocks:rocking:

Thank you
Billy D

---AutoMerged DoublePost---

:w2:

1. Mine blows pretty good but not as hard as the newer trucks. Not sure if it's a 2nd gen thing or if I just need to do some cleaning.

2. That I don't know.

3. My truck came with one hard wired in. As far as I know there isn't a plug but I could be wrong.

4. I've never had to replace one so I'm not too sure. By crusty do mean it's rusted up some?

:c:Thank you very much:c:

i would assume the oil pan can be removed by lifting the engine up.... at least thats what we did on my friends first gen...