Turbo to Big??
#1
Turbo to Big??
Hey guys I was wondering if i could get your imput. I bought a Holset HX55 turbo for my truck and i was thinking it might be a little over kill. The truck is pretty stock. No fuel plate, star wheel cranked, 4" exhaust, cold air intake. So if you guys could tell me what you think that would be great. THANKS!
#2
yes that is way to big. you should just keep your hx35 on there. with the mods i have i run a super b turbo that is a 57/65/14 and it works great for me. if you are planning for more mods like injectors. if your hx 35 is running hot know try bumping your timming to 16 degree that will help on your egts and make sure you do a 4kgov spring to best mod out there for these 12v. make sure you tune your afc right to do not just roll it all the way forward will kill your spool up. there are some more free mods you can do to the afc housing like shaving and 1/8 off of the foot and cup washer in the housing. but for turbo you need to tell me more about what mods you are looking at
#8
#9
#10
The mm is the size of the inducer of the compressor wheel the second is the size of the exducer of the turbine wheel. The cm3 is the volume of the turbine housing, they use cm (cubed) and a/r ratio.
---AutoMerged DoublePost---
Also there are alot of different hx55's what did you get exactly?
---AutoMerged DoublePost---
Also there are alot of different hx55's what did you get exactly?
Last edited by Lostnwalmart; 07-29-2011 at 07:24 PM. Reason: Automerged Doublepost