Valve Springs ???
#1
Valve Springs ???
I'm looking at a 4k gsk, a hamilton cam and an exhaust brake. Each one of these mods recommends or requires valve springs to be replaced. the exhaust brake and 4k gsk needs 60lb springs, the cam recommends 165lb valve springs for over 50psi boost or 500hp. So what am I supposed to do here??? should I go with 60lb springs cause i'll be using the brake and keep it under 500hp? Any input would be great
If your confused about my sig - I'm doing a p pump swap
If your confused about my sig - I'm doing a p pump swap
#3
I also believe that the 60# springs for the exhaust brake are a "minimum" recommendation.
The following users liked this post:
Chevy72 (06-10-2011)
#4
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
Jake12valve
Diesel In Distress - Support Ticket
5
05-10-2015 11:57 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM
POWERSTROKEMANIAC
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-30-2014 11:32 AM