got 1st, 2nd gear an thats all?? need help
#1
got 1st, 2nd gear an thats all?? need help
I have a 95 Dodge 2500 turbo diesel with a 5.9 I'm havein problems with the tranny. Stopped at a red light everything was workin right. When i took off I only got first an second.. The throttle position sensor shows voltage 5.00: I had a computer hooked up to the truck an the throttle % stayed 0 even when I mashed the pedal??? I need some advice before I just go a rebuild my tranny for no reason.
#3
I would def check out the TPS. Here's some good info:
Dodge diesel maintenance tips
Scroll down almost halfway.
Dodge diesel maintenance tips
Scroll down almost halfway.
#4
You should have a 47RH tranny which operates hydraulically for first thru third. tps should only affect od and lock up. not saying that the tps is good. voltage at idle should be around 1 volt with it going toward 5v at full throttle but you need to be checking the right wires. no third gear could be valve body issue or like mine was a seal which did not allow the piston to be applied.
Thread
Thread Starter
Forum
Replies
Last Post
corksil
Ford Powerstroke 99-03 7.3L
2
08-02-2015 10:19 PM
aoutlaw95
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
03-03-2015 09:02 PM
myago92
1st Generation Dodge Cummins 89-93
3
10-17-2014 08:50 AM