turbo ex elbow ??
 

hi
is there a elbow that bolts up to the hx35 turbo to connect directly to a 4 in ex pipe ?

i have a 4 in ex system but the turbo elbow is only 3 in so pipe is necked down there .

egt are a little higher than i like when towing hills in my area so i am trying to lower them .

where do i get one ?

how much ?

thank you !:pca1:

Pac brake used to make a 4" elbow for a 12v. It was spendy though.

---AutoMerged DoublePost---

What kind of boost are seeing? Do you have a boost elbow? If not get a elbow, set it around 30 to 35psi and that should help alittle.

hi
i got a non adjustable boost elbow with the 10 plate , it has a small orfice and does bring up boost faster than the stock one did .

i have never had it over 24 lbs of boost , maby the orfice is still too large to allow boost to get any higher ?

Make your own get a 4 inch 45 degree pipe elbow cut the ends off the stock one have em welded to the elbow and weld the elbow to the down pipe