killer dowl pin
i was wondering if you could just take the pin out and run it like that in sted of buying the kit to fix it :humm:
|
noo do not do that just make a delete kit yourself
|
Peen it - no kit required.
|
what do you meen peen it
|
he means pin it..there is a thread on here somewere.
|
No I mean "peen" it:
peen [peen] Show IPA –noun 1. a wedgelike, spherical, or other striking end of a hammer head opposite the face. –verb (used with object) 2. to enlarge, straighten, or smooth with a peen. 3. to strengthen (a metal surface) by light hammering or by bombardment with steel balls or shot. Three whacks with a center punch around the edge of the hole at 10, 2 and 6 o'clock. Or whatever number and positions you like. Just make it so the KDP can't come out. And no extra parts cobbed up in there to come loose again later, either. |
thats what i did
|
Solder it in and I'm not talking about using a cheasy iron to do it I mean like brazing it in seen a few like that
|
I just cut a small piece of aluminum and tabbed mine.
|
All times are GMT -5. The time now is 01:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands