Turbo ?
 

building engine Sdx 5x14 no plate afc mods 4k rev spring 60lb valve springs Mack plug 191dv marine pistons 12mm head studs

What turbo should I go with any good ideas ?

what kind of budget are you lookin at

Turbo ?
 

Well not big enough for twins that's for sure

66mm range possibly? Or would that be too much? I've heard of trucks in the 700 range running that size still

a 66 has potential for 750 or so. I've heard the 68 spools like a 64, and pushes like a 71.

I'm getting mine from Chris at ED. We've been talking a couple weeks now about the best turbo for my application. He'll set you straight.

What do you want to do?

Turbo ?
 

Well I'll have to drive it about 30 miles a day other then that have fun with it

Power range? Straight stick, auto? Do you want horsepower or torque?

Turbo ?
 

Good to auto billet tc and input shat I'm after hp

If you are after power only, no towing, then you could go bigger, like a 475 or 78 as a single if you want it somewhat streetable, or hang one of those under a 62 for a set of compounds for a little better street manners.

It all depends on your overall goal. How much power are you looking to make? What exactly do you use the truck for?

Turbo ?
 

Well over all goal is maybe around 800 hp with twins one day I'm thinking of just putting fuel plate back in and stock dv for now and getting a 62/65/14 phat shaft then when I can afford it use that for my top turbo what do u think about that plan ?

And I really never have a reason to tow with it

If you build the trans now, leave the fuel plate out, just tune the AFC. The 62 is a good size, just make sure to pick the right size exhaust housing, especially if you are going to run it in a twin setup later on.

You want 800hp on fuel? I'd get a 64 for the top turbo then.

Turbo ?
 

Yes the trans is good to go put alot of money in it I'm a transmission guy and that's what I was thinking 800 fuel so u think 64/65/14 ? I have really no clue when it comes to twins thanks man any info is good thank you

Depends on how much power you want until you get the twins. 64/65/14 will spool fairly quick, might get you 600hp as a single. I think I'd go with a bigger turbine wheel though. 71 maybe.