grid heater relay question
 

i am going to replace me grid heater relays with a ford starter solinoid... any idea on how to wire it in? i read on here about using the ford starter relay in place of the factory ones... but have no clue were to put which wire on the starter solinoid... any ideas? thank you in advance for any help:c:

Not real sure about the starter solenoid, but this is what I'm looking at doing for my relays.

http://murent.us/dodge-heater-relay/

:tu:

I used one ford starter relay to do my fathers 99 live battery feed on the battery side and grid heater wires on the other side,the signal(small post )is being run by a push button inside the cab due to the trucks computer not sending the power to the relays which started this whole conversion,if you check your signal wire to find the live one ,when your wait to start light is on, you can use it to power the relay

SWEET!!! thanks alot guys! just what i was looking for!:c: