Timing to 17,5°
 

ok, will i fry my HG ?

i took threading oil and torqued the bolts to 150...

and how the **** do i time in the pump ??

i loosened the 4 bolts holding the pump and it didn't move one bit ???

i'm really considering taking the truck to a shop to have this done and fix the KDP at the same time :P

you change the timing by the gear that runs the pump and without studs you will blow that gasket i would not go more than 16 degrees
also you have to have a timing tool to time your pump
TSB 18-10-94 Rev. A
that link will show you how to time it

Could also use a barring tool...