boost?
how much boost is to much on a 94 stock head gasket and bolts?
|
from what i have read on here around 50-55 with a retorqe
---AutoMerged DoublePost--- dont know how long that last though |
I dont like seeing over 40 psi without head studs. Anything above that and you run a good risk of blowing the headgasket anything below is relativley safe
|
on my 95 i ran 40 psi maybe a little under for about a year and had no problems. the third day that i tightened up my boost elbow i saw 51psi and pop my head gasket blew. scott is right keep it under 40 psi for good reliability.
|
ok thanks for the help :tu:
|
If your gonna keep the stock turbo. i wouldnt go over 35psi.
|
What is stock boost I don't have a boost gauge yet what do they push stock
|
mines stock and im pushing 24psi. but im also running on 5 cylinders most of the time :argh:
|
what if you have head arp head bolts instead of studs can you push it over 40?
|
Originally Posted by 12vcumminspower
(Post 644075)
What is stock boost I don't have a boost gauge yet what do they push stock
I only saw 16-17 or so before I added a boost elbow (not an adjustable one, just one with a small-calibrated orifice that came with the #0 plate.), then I saw 23ish. I'm gonna block off the WG and see what it blows to on the stock turbo, with minor AFC mods (housing slid forward and 0 plate in the 'normal/mid' range. Was previously in FF but I wanted lower EGT's at WOT.) |
All times are GMT -5. The time now is 11:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands