Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   starter problem? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/61436-starter-problem.html)

bowtech 10-24-2010 05:26 PM

starter problem?
 
some time it start some time just clicks but i tap on starter and use to start now only click. i just put a new starter on few months back. now wont start even if i tap on it

daveO 10-24-2010 06:34 PM

You might want to look at upgrading the contacts and plunger:

LarryB's Dodge starting problems solved here.

I had similar problems with my starter and this did the trick.

bowtech 10-24-2010 10:54 PM

the small 8 mm nut on the starter that wire is the ground right? the whole stud spins is that normal

daveO 10-25-2010 10:58 AM

I believe the 8mm stud is actually the wire for the solenoid. The stud shouldn't be spinning.

Dr. Evil 10-25-2010 11:07 AM

Stud should not spin. There is a repair kit ion the link above

bowtech 10-25-2010 05:14 PM

huh it spun when i got it out of the box from carquest

Dr. Evil 10-25-2010 07:33 PM

how did you get the nut tightened then?

bowtech 10-25-2010 11:45 PM

when i torque the nut down hold the wire and it wouldnt spin

blazier18 10-25-2010 11:57 PM

bad ground happened to me


All times are GMT -5. The time now is 12:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands