Dana 80 dually
 

Has any one on here put a dana 80 dually rear end on 2500 to make it a dually 2500? if so how hard is it and how much modding is needed? :humm:

I've been thinking about the same thing, just not sure if anything is different besides the rearend and the box :pca1:

I would assume it shouldnt be to hard, it would be pretty sweet though. Im guessing it would be just like having a 3500 :choochoo:

the dana 80 is narrower

I was told that drw dana 80 is 2 inches wider than a srw dana 70

if your truck had a single wheel dana 80 then the dual wheel dana 80 is a direct bolt in. the cab and chassis rearend is narrower.

im thinkin about doin the same thing but dont wanna buy fenders

a dually dana 80 from a regular dually will bolt in to a 2500 truck. a dually dana 80 from a cab chassis will not work. SRW and DRW beds are the same so you can order dually sides and bolt em onto a SRW bed however you will need to cut your wheel well larger. for the front if its 4x4 all you will need are the dually spacers you do not need the whole axle.