Changing mods
 

Im gonna be changing my setup up around a lil bit and was looking for some info on the setup im thinking about cause ive been towing alot with the setup i have and it sucks haha, but this is what i wanted to change the injectors i have for a set of sdx 5x.012 and the turbo i was thinking of doing a 60/60/16 or a super b and a three piece manifold but keep everything else the same thats in my sig, thanks

Yeah, you're WAY WAY beyond the capabilities of the stock turbo if your injectors are 250 hp over stock. My opinion is that the 16 cm exhaust housing is a good bit too large for towing. I have a stainless 13cm and wish it would spool faster.

yeah i'd recommend something around the 62/65/12 size or maybe a super b special which measures out to a 64/71/14, but i'd stay away from a 16 cm exhaust housing that's huge and might not ever spool and if it did it'd be laggy which is not what you want for towing, at least i wouldn't

i ran a 18cm hx40 for awhile with just a fuel plate and it pushed 28psi and then i add some 370s to the mix and it went to 32 psi but it was soooo slow spooling now i the 14cm and it works out pretty good

i got 5x0.012's bosch wat do u got